LED installation guide

A preview from our portfolio

Our Products:
LED Modules
LED Power Supplies
Stock Channel Letters
Custom Channel Letters
LED Installation:
Questions and answers
Installation guide
Mounting
Splicing
Company:
About us
Gallery
Contact
Home

LED Illumination System for Channel Letters and 12VDC Power Supplies Installation Guide View our printable LED instruction guide.
•Page 1 of 4 •
Products covered in this guide: LED Module: Part Number Description
SL-001R SL-002A SL-003B SL-004G SL-005W	Red LED Module Amber LED Module Blue LED Module Green LED Module White LED Module
Power Supplies: Part Number Description
TR3A 12VDC, 3.3 Amp, 40Watt, 1 Output LP1020-12 12VDC, 1.6 Amp, 20Watt, 1 Output, Class 2 LP1040-12 12VDC, 3.3 Amp, 40Watt, 1 Output, Class 2 LP1060-12-GG290 12VDC, 5.0 Amp, 60Watt, 1 Output, Class 2
------------------------------------------------------------------------------------------------------------
ATTENTION!
Scope:
This guide is designed to aid in the installation of LED module channel letter illumination products sold by Electraletter® Inc. Skilled trades people that are familiar with general construction, electrical and sign installation techniques should do the installation. Licensed electricians should provide all installation and hook-up of both the primary input and secondary outputs of the power supply. All installation and hook-ups should be done in accordance with all national and local codes. In no way is this document intended to construe warranty or fitness of use of the products described, nor is it to provide safety instruction for those installing the products.
CAUTION: TURN OFF ALL INTEGRAL DISCONNECTS BEFORE SERVICING (IF INTEGRAL DISCONNECTS ARE NOT PROVIDED, TURN OFF POWER TO THE SIGN BY OTHER MEANS, i.e. TURN OFF THE CIRCUIT BREAKER OR REMOVE THE FUSE AT THE SEVICE PANEL).

THE FIELD ASSEMBLY OF ANY SIGN IS SUBJECT TO THE ACCEPTANCE OF LOCAL INSPECTION AUTHORITY.
------------------------------------------------------------------------------------------------------------
LED Modules

Electraletter® LED modules are a low-voltage, long-life alternative to neon and florescent lighting for channel letters. The light source for the LED module is the Light Emitting Diode (LED) instead of traditional neon or florescent tubes. LED technology allows the LED modules to provide excellent color and brightness in a safe, low-voltage circuit (12 volts DC). LED modules are a robust, easily installed product designed for a long life of safe, maintenance-free operation.


Fig. 1- LED module layout. All modules operate on 12VDC and can be run by the same power supply.

Tools Required:

Wire stripper/cutter Measuring tape

Standard Hardware and Supplies:

Splice connector, Molex IDC (Insulation Displacement Connector) Type 4" or 8" nylon zip ties 3M VHB tape Bulk wire

•Page 1 of 4 •
next \| print